I’ve been wanting to do a Daedalus-class ship from Star Trek for a while now. Originally, I’d planned on doing the design commonly referred to as “Daedalus-Class,” the USS Horizon from Sisko’s office. Though, the only canon Daedalus-class ship is the USS Essex and it was never seen on screen. Anywho, I got the idea to do this model (again) after Steve Neill
restored the original Horizon and did a customer build of his self-molded kit a while back. I’d done one years ago, but it went kaput in a hard drive failure. Unfortunately, what kept me from doing the DS9 model was a lack of decent references. All I have are a few pictures not showing the entire model, both from when it was labeled “Essex” for the ST Chronology and when it was labeled “Horizon” for DS9. Other than that, I have incorrect fan schematics and a render sheet of Doug Drexler
’s model he made for the ST New Voyages episode In Harm’s Way. Unfortunately, the renders on that sheet are all perspective views, rather than true top, side, etc. orthographic renders, so using them was possible but the perspective might have thrown things off. That was a real setback, because Doug did a really lovely model based off of the original desktop model (an advantage to working at Paramount
) and I was going to use those until I was prepping them and I noticed the perspective issue.
So, there I was ready to do a Daedalus-class but I had so-so references. However, then I was looking at an article by Bernd Schneider on his site (Ex Astris Scientia
) regarding the Daedalus-class and I found a fan-made reboot design by Christopher Freeman, AKA Aehternaut. I’d seen the design years ago on Scifi-Meshes, but I had forgotten about it.
This design is a more modern take on the Daedalus-class that takes the show Enterprise and Doug Drexler’s NX-01 into account. I like it, so I decided to model it. As you can see, the schematics are a 3-view, which gives me plenty to go by but also leaves some room for interpretation and throwing in my own things. Also, I will be changing a few things. One notable change is having the blue stuff on the warp engines only on the inside. This change is to go more with Doug’s more recent “Season 4″ NX refit, where he added a secondary hull and “capped” the outer warp blue stuff. (among other things)
Anywho, I’ve been picking at this for a few days and this is where I am:
Up next is probably some grid lines. I’ve been avoiding them but they need to be done.